Conrad Energy remote control ARF 2185 mm ROC006 Scheda Tecnica

The model must be adjusted by skilful placement (2) of the flight battery (1) so that the centre of gravity is approx. 

75 mm behind the front side of the wing (the addition of trimming lead should be avoided), see figure 9.
To do so, mark the corresponding centre of gravity position at the bottom of the wing with a pen. From the bottom, 

hold the assembled and ready-to-fly model at the measured positions with your index fingers (or a corresponding 

device). If the centre of gravity is set correctly, the model should be leaning slightly forward.

 

Measure the centre of gravity only with the model completely ready for flight (inserted flight battery, applied 

cabin hood, etc.).