Carson RC model speedboat ARR 600 mm 500106003 Scheda Tecnica
![Carson](https://files.manualsbrain.com/attachments/1aec1ca6c9998bef55c1dde3b0ea87c6f21524cb/common/fit/150/50/6cf1ecd4b51a95be0c78f32ef60809462cdc978ccd95a6da6bd4af8557a3/brand_logo.gif)
Codici prodotto
500106003
G
19
CARSON RC Premium Boat T78 "Catherine" 500106003
Assembling the RC unit
An appropriate RC unit must
be in service before you can
take your new model boat onto
the water. We recommend our
2.4 GHz transmitter tray unit
CARSON REFLEX STICK 6 Channel
Article no.: 500500001 which has
been used here as an example
in the following steps. You can
achieve a maximum range of
approx. 100 metres with the
REFLEX STICK 6 Channel.
2.4 GHz DSSS Digital Proportional Radio Control System
Place your model boat on the pre-assembled boat stand (adhesive completely cured) and stay well clear of the propellers at all times. Carefully
remove the model’s cover and have your receiver, RC unit and a fully charged driving battery ready. Now insert the receiver plug of the MARINE
speed controller into the throttle channel connection on the receiver. For the REFLEX STICK, the plug must be inserted into channel 1. Insert the
plug of the steering servo into the connection for channel 2 (for REFLEX STICK) on the receiver. For further information, refer to the Operating
Instructions supplied with your remote control.
Pay attention also to the notes and information included in the instructions supplied for the speed controller.
Connect the speed controller, motor, receiver and battery as shown in the diagram below:
APPROX. 100 M RANGE
electric motor
to the battery
on/off switch
black
red
to the receiver
(Channel 1)
steering servo
(Channel 2)
Art. no.: 500500001