Renkforce DMX LED effect light No. of LEDs: 84 DL-LED163 DL-LED163 Scheda Tecnica

The LED Effect Light is used to generate light effects in light show equipment, party rooms, etc. and is

controlled by the built-in controller or an external DMX controller.
This product is only approved for connection to 100-240 V/50/60 Hz alternating current and only for use with

an earthed mains socket.
The DMX connection must only be connected to suitable DMX controllers or other DMX effect lights with

DMX connections.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be

avoided under all circumstances.
Any use other than that described above will damage this product and involves the risk of short circuit,

fire, electric shock, etc.
The entire product must not be modified or converted, and the casing must not be opened.

 This symbol on the device indicates that the user must read these operating instructions before

using the product and observe them during operation.

 The symbol with a lightning bolt in a triangle is used where there is a health hazard, e.g. from

electric shock. The device contains no parts that require servicing by the user. Therefore, never

open the device.

 The  exclamation  mark  indicates  important  notes  in  these  operating  instructions  that  must  be

strictly observed.

 The arrow symbol indicates special advice and operating information.

 This symbol indicates that the product must only be used indoors.

 This symbol indicates the minimum distance to the illuminated surfaces.