Renkforce DMX LED effect light No. of LEDs: 84 DL-LED163 DL-LED163 Scheda Tecnica

By purchasing this LED effect light, you have acquired a product designed to the state of the art and ope-

rationally reliable. Nevertheless, problems or errors may occur. Therefore, we would like to describe how

to eliminate possible errors here:

No function after the device has been connected to the power supply:
•  The mains plug is not plugged into the socket correctly.
•  The mains cable is not connected to the device mains connection correctly.
•  The mains socket is not supplied with current.

There is no reaction to DMX commands:
•  The blackout mode is activated at the DMX controller.
•  The DMX address is set wrongly.
•  The connection between the DMX controller and the light effect is interrupted.
•  The DMX line is too long or subject to interference. Use a special DMX high frequency line. Try placing

the DMX line away from the interference source.

•  The polarity of the DMX connections to the DMX controller and light effects are different.
•  If possible, try another DMX controller.

The music control does not work:
•  Music control is not activated.
•  Music playback volume is too low. Try upping the volume.
•  Test the function of the installed microphone by tapping a finger on the housing. The sound to light con-

trol should react to these impulses.