Sygonix 43192V Manuale Utente
42
5.4.1 Channel
Use this field to select a channel to set up, or to modify its settings.
5.4.2 Name
Users can modify the name of the camera for each channel. Note that the name of the camera
for each channel must not exceed nine Romanized letters or four Chinese characters.
for each channel must not exceed nine Romanized letters or four Chinese characters.
5.4.3 Position
Naming the location is optional. By pressing “Enter,” users can switch between “U-L,” “D-L,”
“U-R,” “D-R,” and “OFF”.
5.4.4 Live
When this field is set to “ON,” the selected channel can be viewed in live view mode; when
“OFF” has been selected, it cannot.
“OFF” has been selected, it cannot.
5.4.5 Audio (Sound Settings)
- (optional)
The audio input for the selected channel can be set up using this field. The options include
“UNBIND,” “CH1,” “CH2,” “CH3,” and “CH4.” For example, if the selected channel is CH1
and the selected “AUDIO” setting is “UNBIND,” there will be no sound audible for CH1; if the
selected channel is CH1 and the selected “AUDIO” setting is “CH2”, the sound input of CH2
will play on CH1.
“UNBIND,” “CH1,” “CH2,” “CH3,” and “CH4.” For example, if the selected channel is CH1
and the selected “AUDIO” setting is “UNBIND,” there will be no sound audible for CH1; if the
selected channel is CH1 and the selected “AUDIO” setting is “CH2”, the sound input of CH2
will play on CH1.
5.4.6 Color
To enter the “Color Setup” menu, click “System
Settings,” then click “Video” and select “Color.” From
this menu, the video color attributes can be adjusted for
the best image quality. By default, the values are set at
31, as this is the median value. Make adjustments to the
hue, brightness, contrast, and/or saturation as
appropriate depending on the actual conditions at the
location where the camera is installed
Settings,” then click “Video” and select “Color.” From
this menu, the video color attributes can be adjusted for
the best image quality. By default, the values are set at
31, as this is the median value. Make adjustments to the
hue, brightness, contrast, and/or saturation as
appropriate depending on the actual conditions at the
location where the camera is installed
.
Press “
Ź” or “Ż” or click the vertical bar on the slide bar and drag the cursor to the left or
right along the slide bar to set color attributes. Clicking the “DEFAULT” button will reset the