Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 Scheda Tecnica
Codici prodotto
6ED1057-3BA00-0AA8
User interface
2.8 Menu bar
LOGO!Soft Comfort Online Help
120
Operating Instructions, 06/2014
2.8.5.38
Tools -> Options: Preference
Here you can define your preferred display settings.
● Whether to display comments
● Whether to display connector names
● Whether to display parameters of a block
● Whether to use antialiasing in the drawing
● Whether to label marked lines
● Whether to save the software interface and working environment
● Whether to start from the diagram tab or project tab
● Whether to display comments
● Whether to display connector names
● Whether to display parameters of a block
● Whether to use antialiasing in the drawing
● Whether to label marked lines
● Whether to save the software interface and working environment
● Whether to start from the diagram tab or project tab
Other possible settings:
● Antialiasing: With antialiasing, corners and edges appear softened.
● If you enable View > Select lines (Page 68) with Label marked lines, the marked lines are
● If you enable View > Select lines (Page 68) with Label marked lines, the marked lines are
labeled as the following example:
B007 > B006/2 means that the connection runs from block 7 to block 6 at input(pin) 2.
LOGO!Soft Comfort does not label connections if the target block to which the connection is
running is in the immediate vicinity.
2.8.5.39
Tools -> Options: Print
Here you can determine the appearance of your printed circuit programs:
● Whether to print the comment you have entered in the comment tab under File →
● Whether to print the comment you have entered in the comment tab under File →
Properties: General (Page 54)
● Whether to print the Ethernet connections you have configured under Tools -> Ethernet
● Whether to print the parameter VM mapping you have configured under Tools ->
● Whether to print the connector names and parameters in a circuit diagram
● Whether to print the list of the parameters of all blocks, of all selected blocks, or only of
● Whether to print the list of the parameters of all blocks, of all selected blocks, or only of
the special timer functions
● Whether to print the list of connector names
● Whether to supress empty page
● Inputting the desired zoom factors for the printing
● Whether to supress empty page
● Inputting the desired zoom factors for the printing