Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 Scheda Tecnica
Codici prodotto
6ED1057-3BA00-0AA8
LOGO! installation and wiring
2.3 Wiring LOGO!
LOGO!
Manual, 06/2014, A5E33039675
Manual, 06/2014, A5E33039675
47
Requirements for relay outputs
You can connect various loads to the outputs; e.g., lamps, fluorescent lamps, motors,
contactor relays, etc. For information on the properties required for the loads connected to
LOGO! ...R..., refer to the technical data (Page 291).
Connecting
Connect the load to LOGO! ...R... as shown below:
LOGO! with solid-state outputs
You can identify LOGO! versions with solid-state outputs by the fact that the letter R is
missing from their type name. The outputs are short circuit-proof and overload-proof. An
auxiliary load voltage supply is not necessary, because LOGO! supplies the load voltage.
Requirements for solid-state outputs
The load connected to LOGO! must have the following characteristics:
● The maximum switched current is 0.3 A per output.
● The maximum switched current is 0.3 A per output.
Connecting
Connect the load to a LOGO! with solid-state outputs as shown below: