Siemens SPS starter kit 6ED1057-3BA10-0AA8 6ED1057-3BA10-0AA8 Scheda Tecnica
Codici prodotto
6ED1057-3BA10-0AA8
UDF (User-Defined Function)
LOGO!
250
Manual, 06/2014, A5E33039675
5. Press OK twice to enter circuit program edit mode. A "U" identifies a UDF block. "U1"
refers to the first UDF block. The following display shows you an example of the circuit
program that contains a UDF block configured from LOGO!Soft Comfort.
6. Move the cursor to "U1": Press , , or .
7. Press OK to enter the screen form for the first UDF block "U1". To select another
7. Press OK to enter the screen form for the first UDF block "U1". To select another
element, press the curor keys.
8. Position the cursor on the selected input ("I1" in this example) and press OK. The cursor
appears in a flashing solid square. If you want to change the first input to another
element, press or .
9. Confirm your selection by pressing OK. The first input of "U1" is now changed.
Editing elements to the outputs of a UDF block
If LOGO! shows the following screen form as shown in the above Step 5 and you want to
change "Q1" to another element, follow the steps below: