Siemens SPS starter kit 6ED1057-3BA10-0AA8 6ED1057-3BA10-0AA8 Scheda Tecnica

Using memory cards 

 

9.2 Inserting and removing the card from LOGO! 

 

LOGO! 

274

 

Manual, 06/2014, A5E33039675 

Removing the micro SD card 

To remove the micro SD card, carefully insert a screwdriver with a 3-mm blade into the 

groove on the front of the socket, and lever the socket partially out of the slot. Press the two 

sides of the socket and pull it out. You can now remove the micro SD card from the socket. 

 

Inserting the micro SD card 

The entry of the card slot is chamfered on its bottom right. The edge of the cards is 

chamfered accordingly. This encoding prevents you from inserting cards in the wrong way. 

Insert the card into the socket, insert the socket into the slot and push it in until it engages. 

 

 

Note 
Make sure that you insert the card into the right position in the socket until you hear an 

audible sound of a click.