Advantech USB-4716 200 kS/s, 16-bit, 16-Channel Multifunction USB Module USB-4716-AE Scheda Tecnica
Codici prodotto
USB-4716-AE
USB-4716 User Manual
2
Chapter 1 Introduction
Thank you for buying the Advantech USB-4716 data acquisition module.
The Advantech USB-4716 is a powerful data acquisition (DAS) module
for the USB port. It features a unique circuit design and complete func-
tions for data acquisition and control.
The Advantech USB-4716 is a powerful data acquisition (DAS) module
for the USB port. It features a unique circuit design and complete func-
tions for data acquisition and control.
1.1 Features
USB-4716 has the most requested measurement & control functions:
• 16 single-ended/ 8 differential or combination analog input channels
• 16-bit resolution A/D converter, with up to 200 kS/s sampling rate
• 8 digital input & 8 digital output channels (TTL Level)
• 2 analog output channels
• 16-bit programmable counter/timer x 1
• Programmable gain for each analog input channel
• Automatic channel/gain scanning
• Onboard 1K samples FIFO buffer for AI channels
• Bus-powered
• Device status LED indicator
• Removable on-module wiring terminal
• Supports high-speed USB 2.0
• Auto calibration function
• Hot swappable
• 16 single-ended/ 8 differential or combination analog input channels
• 16-bit resolution A/D converter, with up to 200 kS/s sampling rate
• 8 digital input & 8 digital output channels (TTL Level)
• 2 analog output channels
• 16-bit programmable counter/timer x 1
• Programmable gain for each analog input channel
• Automatic channel/gain scanning
• Onboard 1K samples FIFO buffer for AI channels
• Bus-powered
• Device status LED indicator
• Removable on-module wiring terminal
• Supports high-speed USB 2.0
• Auto calibration function
• Hot swappable
Note:
The USB chip on your system may have a limita-
tion on the number of USB devices it will support.
Normally, only five USB-4716 devices can be
supported.
tion on the number of USB devices it will support.
Normally, only five USB-4716 devices can be
supported.
Note:
The power output of an USB port is 500 mA,
while the USB-4716 requires 360 mA (typical).
This means that if an USB hub is used, it will
need an external power supply to support more
than one USB-4716 device.
while the USB-4716 requires 360 mA (typical).
This means that if an USB hub is used, it will
need an external power supply to support more
than one USB-4716 device.