Advantech ADAM-6050 18-Channel Isolated Digital I/O Modbus TCP Module ADAM-6050-BE Scheda Tecnica
Codici prodotto
ADAM-6050-BE
ADAM-6000 Series User Manual
72
5.3.3 I/O Module Configuration
After you have completed all general configuration of ADAM-6000 mod-
ule described in previous section, then you need to configure setting for
input and output channel such as channel range, calibration and alarm. At
the same time, you can see input channel value and set value of output
channel in the Status Display area of utility. In the Module Tree Display
area, click the item showing IP of the ADAM-6000 modules you want to
use. There will be two items appearing below the IP: All Channel Con-
figuration and GCL Configuration item. Refer to Figure 5.4 below.
(The related feature of GCL item will be described in Chapter 7)
ule described in previous section, then you need to configure setting for
input and output channel such as channel range, calibration and alarm. At
the same time, you can see input channel value and set value of output
channel in the Status Display area of utility. In the Module Tree Display
area, click the item showing IP of the ADAM-6000 modules you want to
use. There will be two items appearing below the IP: All Channel Con-
figuration and GCL Configuration item. Refer to Figure 5.4 below.
(The related feature of GCL item will be described in Chapter 7)
Click the cross icon besides the All Channel Configuration item, one
dialog window will appear to ask you typing password. After you enter
the correct password, Individual Channel Configuration items will
appear below the All Channel Configuration item.
dialog window will appear to ask you typing password. After you enter
the correct password, Individual Channel Configuration items will
appear below the All Channel Configuration item.
Figure 5.4: Channel & GCL Configuration
All Channel Configuration
Individual Channel Configuration
GCL Configuration