Wago 759-302 COMMISSIONING TOOL I/O-CHECK 2 759-302 Scheda Tecnica
Codici prodotto
759-302
96 • Command Reference
Menu Node (Commands)
WAGO-I/O-SYSTEM
759
WAGO-I/O-CHECK
2
6.4.3 Default (Menu View\Zoom)
Use this command to display the node with its original size.
Shortcuts
Toolbar:
Keyboard:
<Ctrl> + <D>
6.5 Menu Node (Commands)
6.5.1 Read Configuration (Menu Node)
Use this command to read the description of the I/O modules from the
connected node.
connected node.
The types of analog I/O modules and special modules are automatically
recognized by WAGO-I/O-CHECK when reading the node. Digital I/O
modules are read with a standard description and can be specified by the user.
Use the command Rename from the menu Module or the button R
recognized by WAGO-I/O-CHECK when reading the node. Digital I/O
modules are read with a standard description and can be specified by the user.
Use the command Rename from the menu Module or the button R
ENAME
from the toolbar Module to change the description of the digital I/O modules.
The node will be displayed as a tree structure in the navigationbar and as a
graphic view in the node display.
graphic view in the node display.
Shortcuts
Toolbar:
Keyboard:
<F5>
or
<Ctrl> + <Shift> + <R>
or
<Ctrl> + <Shift> + <R>
Note:
A coupler cannot recognize passive I/O modules. Therefore these modules
are not displayed by WAGO-I/O-CHECK.
A coupler cannot recognize passive I/O modules. Therefore these modules
are not displayed by WAGO-I/O-CHECK.