Lappkabel 70002757, Spiral Cable, , Black Sheath 70002757 Scheda Tecnica
Codici prodotto
70002757
U.I. Lapp
GmbH
DATA SHEET
SPIRAL H07BQ-F BLACK
DB70002750EN
valid from: 2010-02-23
Originator: T. Merker / PCM
Document:
DB70002750EN.doc
page 1 of 1
All deviations from this specification are subject to explicit consent of U.I. Lapp GmbH. All rights reserved acc. to DIN 34.
PD 0019/2.1_11.09EN
APPLICATION
For mechanically medium use conditions with high abrasion impacts. Extension lengths of up to 3 times of the closed length.
Extra high recoiling forces.
Harmonised H07BQ-F are connection cables with an outer polyurethane sheath for flexible use in dry, damp and wet sur-
roundings as well as for high tensile forces. At room temperature, the outer sheath is hydrolysis-resistant, resistant to aque-
ous acids and aqueous bases, resistant to tear propagation and largely resistant to oils and fuels.
Typically, SPIRAL H07BQ-F BLACK can be connected to agricultural machines and tools, handheld and transportable devices
and motors – at construction sites for example - , electrical devices at farms and dockyards such as drills and circular hand
saws, as well as heaters, provided that the danger of contact between this cable and hot pieces/surfaces is excluded.
Extra high recoiling forces.
Harmonised H07BQ-F are connection cables with an outer polyurethane sheath for flexible use in dry, damp and wet sur-
roundings as well as for high tensile forces. At room temperature, the outer sheath is hydrolysis-resistant, resistant to aque-
ous acids and aqueous bases, resistant to tear propagation and largely resistant to oils and fuels.
Typically, SPIRAL H07BQ-F BLACK can be connected to agricultural machines and tools, handheld and transportable devices
and motors – at construction sites for example - , electrical devices at farms and dockyards such as drills and circular hand
saws, as well as heaters, provided that the danger of contact between this cable and hot pieces/surfaces is excluded.
SPIRAL CABLE DIMENSIONS
L1 (4 versions) in mm: 500; 1000; 1500; 2000
L1:L2 (4 versions, each): 1:3
S1 in mm: 200 (radial outflow)
S2 in mm: 600 (radial outflow)
L1:L2 (4 versions, each): 1:3
S1 in mm: 200 (radial outflow)
S2 in mm: 600 (radial outflow)
MAKE-UP
Conductor:
Copper, tinned, fine-wired according to IEC 60228/VDE 0295 class 5
Construction type:
Harmonised H07BQ-F according to HD 22.10/VDE 0282-10
Core insulation:
Rubber compound EI 6 according to HD 22.1 and EN 50363-1
Core colours:
Coloured according to HD 308/VDE 0293-308
Core printing:
◄HAR►, ◄VDE►
Core quantity:
3, 4 or 5
Outer sheath:
PUR compound TMPU according to HD 22.10 + EN 50363-10-2, black sheath colour
Printing on the outer sheath:
Example: “H07BQ-F 4 G 1,50 ROHS CE”
TECHNICAL DATA
Rated voltage U
0
/U:
450/750 VAC; 675/1125 VDC
Test voltage:
3000 VAC
Conductor temperature range:
Flexible use: -25 °C to +50 °C
Oil resistance:
EN 60811-2-1-10/VDE 0473-811-2-1-10
Hydrolysis resistance:
EN 50396-10.3/VDE 0473-396-10.3
RoHS:
No substances according to the RoHS directive (2002/95/EC)
EC directive:
This cable confirms to the ECD 73/23/EEC (LVD… Low Voltage Directive)