Tandberg Data StorageLibrary T40+ 8147-LTO Scheda Tecnica
Codici prodotto
8147-LTO
DATASHEET
www.tandbergdata.com
A professional scalable tape backup solution
Key Benefits
The Tandberg StorageLibrary T40
+
and T80
+
tape libraries
are professional backup and data protection solutions,
providing maximum performance and scalable capacities
up to 123.2TB*.
providing maximum performance and scalable capacities
up to 123.2TB*.
The Tandberg StorageLibrary T40
+
and T80
+
incorporate the new
Pass-Thru feature, allowing you to add additional drives and
storage capacity as and when you need it. The Pass-Thru feature
will allow up to five T40
storage capacity as and when you need it. The Pass-Thru feature
will allow up to five T40
+
units to be stacked together in a 19” rack
configuration.
The T40
+
base unit is available with either 24 or 40 slots and the
Capacity on Demand (COD) feature allows you to electronically
upgrade the number of slots from 24 to 40. The number of slots can
be increased from 40 to 77 by adding one additional T40
upgrade the number of slots from 24 to 40. The number of slots can
be increased from 40 to 77 by adding one additional T40
+
in Pass-
Thru mode. The base unit can be installed fully with up to 4 half
height LTO drives or 2 full height LTO drives and full supports LVD
SCSI, Native Fibre Channel and SAS connectivity.
height LTO drives or 2 full height LTO drives and full supports LVD
SCSI, Native Fibre Channel and SAS connectivity.
The T40
+
and T80
+
are designed to improve efficiency and minimize
IT downtime. The Performance on Demand (POD) feature allows
you add additional drives or upgrade to the next LTO generation,
increasing your library’s performance and capacity. The Web
browser-based remote management interface allows you to
monitor, control, configure and diagnose problems from anywhere
in the world. The T40
you add additional drives or upgrade to the next LTO generation,
increasing your library’s performance and capacity. The Web
browser-based remote management interface allows you to
monitor, control, configure and diagnose problems from anywhere
in the world. The T40
+
and T80
+
support SNMP, which will
immediately send an e-mail on any error.
The T40
+
is supplied with 1x power supply. A secondary power
supply can be fitted to provide redundancy for mission critical
operations and to avoid power interruption to the library. Both
power supplies share the load under normal operating conditions.
However, if one of the power supplies fails, the other will assume
the full load.
operations and to avoid power interruption to the library. Both
power supplies share the load under normal operating conditions.
However, if one of the power supplies fails, the other will assume
the full load.
The T40
+
and T80
+
tape libraries provide outstanding value for IT
managers that need to perform large, unattended backups, and
who require flexibility, reliability and a future proof solution.
who require flexibility, reliability and a future proof solution.
Capacity on Demand
Start with 24 slots, expand to 77 slots, increasing capacity from
19.2TB to 123.2TB*
19.2TB to 123.2TB*
Performance on Demand
Add drives or upgrade to the next generation LTO technology to
increase performance and meet demanding backup windows
increase performance and meet demanding backup windows
Ease of Management
Browser-based remote management interface allows users
to remotely monitor, control, configure and diagnose via
the Internet
to remotely monitor, control, configure and diagnose via
the Internet
Minimize Downtime
The Redundant Power Supply (RPS) feature detects power
fluctuations and fan failures.
fluctuations and fan failures.
WORM and Encryption
WORM (write once read many) and Encryption (LTO-4 only) for
enhanced data protection and regulatory compliance
enhanced data protection and regulatory compliance
* Assumes a 2:1 compression ratio
Tandberg StorageLibrary
T40
+
and T80
+