HP 951XL Officejet Value Pack-75 sht/A4/210 x 297 mm CR712AE#ABH Scheda Tecnica

Codici prodotto
CR712AE#ABH
Pagina di 15
Potential health effects
Routes of exposure
Potential routes of overexposure to this product are skin and eye contact
Inhalation of vapor and ingestion are not expected to be significant routes of exposure for this
product under normal use conditions.
Complete toxicity data are not available for this specific formulation
Chronic health effects
None known.
Carcinogenicity
None of the components present in this formulation at concentrations equal to or greater than
0.1% are listed by EU, MAK, IARC, NTP or OSHA.
Classification
Not classified.
Physical hazards
Not classified as a physical hazard.
Health hazards
Not classified as a health hazard.
Environmental hazards
Not classified as an environmental hazard.
Components
CAS #
Percent
EC-No.
Classification
3. COMPOSITION/INFORMATION ON INGREDIENTS
3445-11-2
< 10
1-(2-hydroxyethyl)-2-pyrrolidone
222-359-4
616-45-5
<7.5
2-pyrrolidone
Xi;R36/38
210-483-1
Proprietary
< 5
Aliphatic diol
Proprietary
Proprietary
< 2.5
Magenta Colorant
Proprietary
112-60-7
< 5
Tetraethylene glycol
Xi;R36/37/38
203-989-9
7732-18-5
> 65
Water
231-791-2
Composition comments
This ink supply contains an aqueous ink formulation.
This product has been evaluated using criteria specified in the EU Directives 67/548/EEC and
1999/45/EC, as amended.
For the full text of the  R phrases mentioned in this Section, see Section 16.
4. FIRST AID MEASURES
Inhalation
Move to fresh air. If symptoms persist, get medical attention.
Skin contact
Wash affected areas thoroughly with mild soap and water. If irritation persists get medical
attention.
Eye contact
Do not rub eyes. Immediately flush with large amounts of clean, warm water (low pressure) for at
least 15 minutes or until particles are removed. If irritation persists get medical attention.
Ingestion
If ingestion of a large amount does occur, seek medical attention.
5. FIRE-FIGHTING MEASURES
Flash point
> 100 °C (> 212 °F) Pensky-Martens Closed Cup US EPA Method 1020
Suitable extinguishing media
For small (incipient) fires, use media such as foam, sand, dry chemical, or carbon dioxide.
For large fires use very large (flooding) quantities of water and/or foam, applied as a mist or spray.
Extinguishing media which
must not be used for safety
reasons
None known.
Unusual fire & explosion
hazards
None known.
Specific methods
None established.
Hazardous combustion
products
Refer to section 10.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Wear appropriate personal protective equipment.
Environmental precautions
Do not let product enter drains. Do not flush into surface water or sanitary sewer system.
Other information
Soak up with inert absorbent material. Slowly vacuum or sweep the material into a bag or other
sealed container. Dispose of in compliance with federal, state, and local regulations. See also
section 13 Disposal considerations.
7. HANDLING AND STORAGE
Handling
Avoid contact with skin, eyes and clothing.
Material name: CN047Series
12093    Version #: 01    Revision date: 18-Jan-2012    Print Date: 18-Jan-2012
SDS GERMANY
2 / 5