ZyXEL VMG1312-B10A VMG1312-B10A-EU01V1F Scheda Tecnica
Codici prodotto
VMG1312-B10A-EU01V1F
Chapter 13 Interface Group
VMG1312-B10A User’s Guide
209
Note: An interface can belong to only one group at a time.
Figure 91
Interface Group Configuration
The following table describes the fields in this screen.
Table 67
Interface Group Configuration
LABEL
DESCRIPTION
Group Name
Enter a name to identify this group. You can enter up to 30 characters. You can use letters,
numbers, hyphens (-) and underscores (_). Spaces are not allowed.
numbers, hyphens (-) and underscores (_). Spaces are not allowed.
WAN Interface
used in the
grouping
used in the
grouping
Select the WAN interface this group uses. The group can have up to one PTM interface and
up to one ATM interface.
up to one ATM interface.
Select None to not add a WAN interface to this group.
Grouped LAN
Interfaces
Interfaces
Available LAN
Interfaces
Interfaces
Select one or more LAN interfaces (Ethernet LAN, HPNA or wireless LAN) in the Available
LAN Interfaces list and use the left arrow to move them to the Grouped LAN Interfaces
list to add the interfaces to this group.
LAN Interfaces list and use the left arrow to move them to the Grouped LAN Interfaces
list to add the interfaces to this group.
To remove a LAN or wireless LAN interface from the Grouped LAN Interfaces, use the
right-facing arrow.
right-facing arrow.
Automatically
Add Clients
With the
following DHCP
Vendor IDs
Add Clients
With the
following DHCP
Vendor IDs
Click Add to identify LAN hosts to add to the interface group by criteria such as the type of
the hardware or firmware. See
the hardware or firmware. See
for more information.
#
This shows the index number of the rule.
Filter Criteria
This shows the filtering criteria. The LAN interface on which the matched traffic is received
will belong to this group automatically.
will belong to this group automatically.
WildCard
Support
Support
This shows if wildcard on DHCP option 60 is enabled.