Buffalo LinkStation 441D 8TB LS441D0804-EU Scheda Tecnica
Codici prodotto
LS441D0804-EU
46
Rebuilding the RAID Array from a Computer
Before turning off the LinkStation, determine which hard drive has failed. The failed drive's status LED will be
glowing red.
glowing red.
1
Turn the LinkStation off and remove all cables.
2
Squeeze the left side of the front panel and swing it open.
3
Pull the failed drive's cartridge out of the LinkStation.
Notes:
• Do not press hard on the top of the LinkStation.
• Pull the drive straight out the front of the chassis.
• Do not press hard on the top of the LinkStation.
• Pull the drive straight out the front of the chassis.
4
Remove the drive from the cartridge.