Buffalo LinkStation 420 LS420D0602-EU Manuale Utente

   Chapter 4 Web Admin interface

LinkStation User Manual

125

Name

Descriptions

IP Address Settings

Click [Modify Settings] 
to change settings.

DHCP

If enabled, the LinkStation will attempt to get its IP address 
from a DHCP server on the network. 

Primary IP Address Set IP address.  
Subnet Mask

Set Subnet Mask.

Default Gateway 
Address

Specify by IP address if Default Gateway Address exists.

Primary DNS Server Specify an IP address of the DNS server which has priority.
Secondary DNS 
Server

Specify an IP address of an alternative DNS server.

Ethernet Frame Size
Click [Modify Settings] 
to change settings.

Ethernet Frame Size Ethernet frame size is the maximum size of data that can be 

sent at a time.  If all devices on your network support Jumbo 
Frame, you may be able to improve transmission efficiency by 
choosing a larger frame size than the default.  

• [1518 bytes (Default)]  It is set to 1518 bytes at  

default.

• [4102 bytes (Jumbo Frame)]  Transfer at 4102 bytes.
• [7422 bytes (Jumbo Frame)]  Transfer at 7422 bytes.
• [9694 bytes (Jumbo Frame)]  Transfer at 9694 bytes.

Network Services

Network Services

Enable or disable AFP and FTP.

[AFP] must be enabled here for Mac OS computers to connect 
via AFP.  Also, enable AFP in the shared folder settings to use 
AFP.

[FTP] must be enabled here for remote users to access the 
LinkStation via FTP.  Also, enable FTP in the shared folder 
settings to use FTP.

The following options can be set from the [Network] screen.