Buffalo NAS server 6 TB LS421-6TBR LS421-6TBR LS421-6TBR Scheda Tecnica
Codici prodotto
LS421-6TBR
11
Chapter 2 Configuration
Configure and administer your LinkStation using the settings interface, accessible from a browser window. Open the
interface using the procedure below or type the LinkStation’s IP address in the URL field of your browser. Within Settings,
the Easy Admin page gives you quick access to commonly used settings.
interface using the procedure below or type the LinkStation’s IP address in the URL field of your browser. Within Settings,
the Easy Admin page gives you quick access to commonly used settings.
Note: Internet Explorer 9, Firefox 18, Google Chrome 24, Safari 5, and later are supported. If you have difficulty
viewing Settings, check the following:
• If there are a large number of registered users, groups, or shared folders, use Firefox 18 or later instead of Internet
viewing Settings, check the following:
• If there are a large number of registered users, groups, or shared folders, use Firefox 18 or later instead of Internet
Explorer.
• If you have a proxy server enabled in the browser settings, disable the proxy server.
• With Internet Explorer, set security to Local intranet. On Windows Server 2012 or Windows Server 2008, higher-
• With Internet Explorer, set security to Local intranet. On Windows Server 2012 or Windows Server 2008, higher-
level security is configured. Set the security to a lower level temporarily.
Opening Easy Admin
Use the Easy Admin page to make common changes to basic settings.
1
Open NAS Navigator2 by double-clicking the
icon.
2
Right-click on your LinkStation’s icon and choose Settings. For Mac OS, click the LinkStation icon while holding
down the control key, then select Settings.
down the control key, then select Settings.
3
The Easy Admin screen will open.