Buffalo NAS server 6 TB LS421-6TBR LS421-6TBR LS421-6TBR Scheda Tecnica
Codici prodotto
LS421-6TBR
42
• USB storage devices
• Card readers (except for card readers that can recognize two or more memory cards)
• Digital cameras
• USB-connected UPSs
• USB printers
Buffalo external USB drives are recommended.
These devices are not supported.
• DUB and DIU series drives
• Hubs, mice, and keyboards
Connect only one device to the LinkStation’s USB port. Some external drives with automatic power-on don’t turn on
automatically when connected to the LinkStation. Use their manual switch to turn them on. Be sure to connect only one
bus-powered drive at a time. If there is insufficient bus power for your USB drive, connect its AC adapter. Note that only
the first partition of a connected USB hard drive is mounted. Additional partitions are not recognized.
• Card readers (except for card readers that can recognize two or more memory cards)
• Digital cameras
• USB-connected UPSs
• USB printers
Buffalo external USB drives are recommended.
These devices are not supported.
• DUB and DIU series drives
• Hubs, mice, and keyboards
Connect only one device to the LinkStation’s USB port. Some external drives with automatic power-on don’t turn on
automatically when connected to the LinkStation. Use their manual switch to turn them on. Be sure to connect only one
bus-powered drive at a time. If there is insufficient bus power for your USB drive, connect its AC adapter. Note that only
the first partition of a connected USB hard drive is mounted. Additional partitions are not recognized.
Dismounting Hard Drives
If the LinkStation is powered on, dismount external drives before unplugging them. You may dismount external drives
with the function button, or any drives from Settings. If the LinkStation is off, then all drives are already dismounted and
may be unplugged safely.
with the function button, or any drives from Settings. If the LinkStation is off, then all drives are already dismounted and
may be unplugged safely.
Notes:
• Do not dismount or disconnect an external drive while any drive is being formatted, accessed, or checked for er-
• Do not dismount or disconnect an external drive while any drive is being formatted, accessed, or checked for er-
rors, or while a RAID array is being created or deleted.
• If you unplug your external drives without dismounting them, Settings may still show “usbdisk” in File Sharing -
Folder Setup. Reboot your LinkStation to clear it.
Dismounting with the Function Button
If the LinkStation is on, hold down the function button for 3 seconds. The white LED will go out as all attached USB
drives are dismounted. You may now unplug them safely.
drives are dismounted. You may now unplug them safely.
Note: Dismounting drives will also restart the services for FTP, AFP, SMB, the print server, BitTorrent, WebAccess,
DLNA, and the iTunes server. Don’t do this while files are being copied for accessed.
DLNA, and the iTunes server. Don’t do this while files are being copied for accessed.
Dismounting from Settings
1
1
In Advanced Settings, click Drives.
2
Click the
icon to the right of “USB Drives”.
3
Select the drive to dismount and click Dismount Disk. The “Confirm Operation” screen will open. Enter the displayed
number, then click OK.
number, then click OK.