Buffalo NAS server 6 TB LS421-6TBR LS421-6TBR LS421-6TBR Scheda Tecnica
Codici prodotto
LS421-6TBR
45
5
The “Confirm Operation” screen will open. Enter the displayed number, then click OK.
6
Depending on the size of your drive, the format may take several minutes to several hours to complete. The
power LED will flash during the format. Shared folders cannot be accessed during a format. Do not turn off the
LinkStation until the disk format is finished.
power LED will flash during the format. Shared folders cannot be accessed during a format. Do not turn off the
LinkStation until the disk format is finished.
Erase Data on the LinkStation Completely
Under some circumstances, data from formatted drives can be recovered. The disk erasure process in this section does
a much more thorough job of erasing data. This procedure is recommended for removing all data from a drive in a way
that makes it nearly impossible to recover with current tools. All data on the drives is completely erased. The LinkStation
will then be in the following state:
• All drives in JBOD mode
• An empty shared folder on each erased drive
• All settings returned to their default values
• All logs deleted
a much more thorough job of erasing data. This procedure is recommended for removing all data from a drive in a way
that makes it nearly impossible to recover with current tools. All data on the drives is completely erased. The LinkStation
will then be in the following state:
• All drives in JBOD mode
• An empty shared folder on each erased drive
• All settings returned to their default values
• All logs deleted
1
In Advanced Settings, click Management.
2
Select Restore/Erase.
3
Click Erase LinkStation.
4
The “Confirm Operation” screen will open. Enter the displayed number, then click OK.