Buffalo NAS server 6 TB LS421-6TBR LS421-6TBR LS421-6TBR Scheda Tecnica
Codici prodotto
LS421-6TBR
79
Exit
Exits NAS Navigator2.
The following tasks may be performed from the LinkStation’s properties window.
Name
Description
Configuration
Click Settings to open the configuration interface.
IP Address
Check Use DHCP to assign an IP address from the DHCP server automatically. If there is
no DHCP server in the network, you cannot use this function.
Check Renew IP address to obtain an IP address from the DHCP server.
You can manually enter an IP address, subnet mask, and default gateway.
Check Renew IP address to obtain an IP address from the DHCP server.
You can manually enter an IP address, subnet mask, and default gateway.
Mount as Network Drive
You can easily map a shared folder as a network drive using NAS Navigator2.
1
Double-click the
icon on the desktop.
NAS Navigator2 will start.
2
Right-click on the LinkStation’s icon, then click Map Share.
Note: Note:
Following name of shared folders can be mounted as a network drive using NAS Navigator2. If the name is different,
mount the shared folders using Windowns option: share, share2, share3, share4, usbdisk1, usbdisk2, usbdisk3,
usbdisk4, usbdisk5
Following name of shared folders can be mounted as a network drive using NAS Navigator2. If the name is different,
mount the shared folders using Windowns option: share, share2, share3, share4, usbdisk1, usbdisk2, usbdisk3,
usbdisk4, usbdisk5