Buffalo NAS server 8 TB TeraStation 1400 TS1400D0804-EU TS1400D0804-EU Scheda Tecnica
Codici prodotto
TS1400D0804-EU
26
RAID 1
Combines 2 drives into a mirrored array. The available space in the array is the capacity of a single drive. Identical
data is written to each drive. If a drive is damaged, data can be recovered by replacing the damaged drive. As long
as one drive in the array remains undamaged, all data in the array can be recovered.
data is written to each drive. If a drive is damaged, data can be recovered by replacing the damaged drive. As long
as one drive in the array remains undamaged, all data in the array can be recovered.
RAID 0
Combines 2 or more hard drives into a single array. The usable disk space is the total space of all drives used. This
simple RAID mode offers faster performance than RAID modes that include parity. If a single drive in the array fails,
then all data in the array is lost.
simple RAID mode offers faster performance than RAID modes that include parity. If a single drive in the array fails,
then all data in the array is lost.
JBOD
This mode uses the hard drives inside the TeraStation as individual drives. The disk space you can use is the total
capacity of both drives in the TeraStation. If either drive is damaged, then the data on that drive is lost.
*Available for TS1400D.
capacity of both drives in the TeraStation. If either drive is damaged, then the data on that drive is lost.
*Available for TS1400D.
Working with RAID Arrays
To change RAID settings, navigate to Drives - RAID in Settings.
Using JBOD
With JBOD, each hard drive in the TeraStation is addressed separately. To put drives from an array into JBOD, follow
the steps below.
the steps below.
1
In Settings, click Drives.
2
Click
to the right of "RAID".
3
Click the array to delete.
4
Click Delete RAID Array.
5
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
Once JBOD is configured, create shared folders on each drive to use them.