Buffalo NAS server 16 TB TeraStation 5400 WD Red TS5400DWR1604-EU built-in Western Digital RED TS5400DWR1604-EU Scheda Tecnica

174

The LCD display can be cycled through different modes by pressing the display button on the front of the TeraStation. 
Also, the items displayed can be configured at Management - Notifications - Front Panel Display Settings in Settings.

LCD Message

Description

Corrective Action

LINK SPEED
Note: When an 
Ethernet cable 
is connected 
to LAN Port 2, 
“LINK SPEED 2” is 
displayed.

LINK SPEED
No LINK

Not connected to network.

Connect an Ethernet 

cable to the LAN port.

LINK SPEED
10 Mbps HALF

Connected at 10 Mbps half duplex.

-

LINK SPEED
10 Mbps FULL

Connected at 10 Mbps full duplex.

-

LINK SPEED
100 Mbps HALF

Connected at 100 Mbps half duplex.

-

LINK SPEED
100 MbpsFULL

Connected at 100 Mbps full duplex.

-

LINK SPEED
1000 Mbps

Connected at 1000 Mbps full duplex.

-

Hostname / IP 

Address

TS-xx xxx
192.168.11.150

Displays the hostname and IP address. At the 

end of the IP address, F (fixed IP address) or D 

(IP address automatically acquired from a DHCP 

server) is displayed.
Note: When an Ethernet cable is connected to LAN 
port 2, “NETWORK2” is displayed in the hostname 
section.

-

Calendar / Clock

DATE TIME
2012/1/1 11:11

Displays the date and time set in the TeraStation.

-

LCD Message

Description

Corrective Action

BOOT FAIL

Hard drive not found.

Contact Buffalo technical support for 

assistance.

SYSTEM Error E04
Can’t Load Krnl!

The firmware is corrupted.

Contact Buffalo technical support for 

assistance.

UPS E10
Dependent Mode

The TeraStation is running on the UPS battery 

due to a power outage. The system will now 

be shut down safely.

Check that power is being supplied to the 

UPS, and if there are no problems, turn on the 

TeraStation.