Buffalo NAS server 12 TB TeraStation 5400 WD Red TS5400DWR1204-EU built-in Western Digital RED TS5400DWR1204-EU Scheda Tecnica
Codici prodotto
TS5400DWR1204-EU
12
10
Reset Button
To shut down and reboot the TeraStation, hold down the reset button.
To shut down and reboot the TeraStation, hold down the reset button.
11
Status LEDs
Normally, these LEDs blink green when hard drives are accessed. If a drive fails, its LED will turn red or amber.
Normally, these LEDs blink green when hard drives are accessed. If a drive fails, its LED will turn red or amber.
12
Factory Use Only
13
Boot Mode Switch
Leave the switch in the HDD position during normal operation. To recover settings, insert the recovery USB drive
into a USB 2.0 port, move the boot switch to the USB position, and press the power button.
Leave the switch in the HDD position during normal operation. To recover settings, insert the recovery USB drive
into a USB 2.0 port, move the boot switch to the USB position, and press the power button.
14
UPS Port
Connect to a UPS.
Connect to a UPS.
15
USB 3.0 Port
Compatible Buffalo USB 3.0 hard drives can be connected. USB hubs are not supported.
Compatible Buffalo USB 3.0 hard drives can be connected. USB hubs are not supported.
16
USB 2.0 Port
Compatible Buffalo USB hard drives, USB flash drives, digital cameras, and USB UPS connection can be connected.
USB hubs are not supported.
Compatible Buffalo USB hard drives, USB flash drives, digital cameras, and USB UPS connection can be connected.
USB hubs are not supported.
17
LAN Port 1
Use an Ethernet cable to connect this port to your network.
Use an Ethernet cable to connect this port to your network.
18
LAN Port 2
This second Ethernet port may be used for network redundancy or backup. You may connect a second TeraStation
directly to this port for backup.
This second Ethernet port may be used for network redundancy or backup. You may connect a second TeraStation
directly to this port for backup.
19
Power Connector
Use the included power cable to connect to an UPS, surge protector, or outlet.
Use the included power cable to connect to an UPS, surge protector, or outlet.
20
Fan
Do not block the fan.
Do not block the fan.
21
Anti-Theft Security Slot
Use this slot to secure your TeraStation with a cable lock (not included).
Use this slot to secure your TeraStation with a cable lock (not included).
22
UID Button
Press the UID button on the front or the back of the unit to cycle the blue LED on and off.
Press the UID button on the front or the back of the unit to cycle the blue LED on and off.
23
Serial Number
This sticker shows the TeraStation’s serial number.
This sticker shows the TeraStation’s serial number.
24
Link LED
Glows orange when the unit is connected to a network.
Glows orange when the unit is connected to a network.
25
Act LED
This LED shows network activity. It blinks orange when the TeraStation is accessed over the network.
This LED shows network activity. It blinks orange when the TeraStation is accessed over the network.