Buffalo NAS server 12 TB TeraStation 5400 WD Red TS5400DWR1204-EU built-in Western Digital RED TS5400DWR1204-EU Scheda Tecnica

169

An icon for the mapped share will appear in Computer or My Computer. You can use this network drive just like 
any other hard drive.

Double-click the 

 icon on the desktop. NAS Navigator2 will start.

Right-click on your TeraStation’s icon and choose Properties - IP Address.

Uncheck “Use DHCP” and enter the desired settings, then click OK.

Note: The following IP addresses are reserved and should not be used. If you configure one of them by accident, 
initialize all settings with the init button on the TeraStation.

Local loopback address: 127.0.0.1, 255.255.255.0
Network address: 0.0.0.0, 255.255.255.0
Broadcast address: 255.255.255.255, 255.255.255.0
The IP address range from 224.0.0.0 to 255.255.255.255

NAS Navigator2 is a utility program that makes it easy to display Settings, change the TeraStation’s IP address, or check 
its hard drive.
If you installed the TeraStation with the TeraNavigator CD, NAS Navigator2 was installed automatically. To launch it, click 

the 

 icon in the Dock.