Buffalo 3TB LinkStation 410 LS410D0301 Manuale Utente
Codici prodotto
LS410D0301
LinkStation User Manual
160
Appendix
Error code
Descriptions
E01
Problem in DRAM DATA LINE. Contact Buffalo tech support for assistance.
E02
Problem in DRAM ADDRESS LINE. Contact Buffalo tech support for assistance.
E03
Problem in RTC CHIP. Contact Buffalo tech support for assistance.
E04
Kernel extraction failed. Contact Buffalo tech support for assistance.
E06
The firmware is corrupted. Contact Buffalo tech support for assistance. Wait 5 minutes
for “E04”, then shut down the unit. Or, turn the power switch off.
for “E04”, then shut down the unit. Or, turn the power switch off.
E07
No hard drives detected. If the hard drives are connected normally, contact Buffalo
technical support for assistance.
technical support for assistance.
E10
Operating from UPS battery. The LinkStation will be shut down normally. After the
LinkStation shuts down, ensure that power is supplied to the UPS. If there is no
problem, briefly press the LinkStation’s function button to reset. Do not hold down
the function button too long or you may get unexpected results.
LinkStation shuts down, ensure that power is supplied to the UPS. If there is no
problem, briefly press the LinkStation’s function button to reset. Do not hold down
the function button too long or you may get unexpected results.
E11
Fan Error. The fan is spinning too slowly or has stopped. Move the unit to a cool place
with good airflow and no objects blocking the fan. If the LED remains lit, replace the
fan with part OP-FAN/LS, sold separately.
with good airflow and no objects blocking the fan. If the LED remains lit, replace the
fan with part OP-FAN/LS, sold separately.
E15
Hard drive IO error. Contact Buffalo tech support for assistance.
E16
The hard disk is not connected or is malfunctioning. Contact Buffalo tech support for
assistance.
assistance.
E17
Internal controller error. Contact Buffalo tech support for assistance.
E20
The circuit board may be damaged. Disconnect and then reconnect power. Reboot
the LinkStation. If the error persists, contact Buffalo technical support for assistance.
the LinkStation. If the error persists, contact Buffalo technical support for assistance.
E21
Internal controller error. Contact Buffalo tech support for assistance.
E22
Drive mount error. Contact Buffalo technical support for assistance.
E23
The hard drive may be damaged. Contact Buffalo technical support for assistance.