Buffalo 3TB LinkStation 410 LS410D0301 Manuale Utente

LinkStation User Manual

168

Appendix

The Info/Error LED blinks red to indicate an error.  

The error may be identified by the pattern of blinking.  

Note:   The error may also be viewed from NAS Navigator2.

E00

MPU is abnormal; no power.  Contact Buffalo tech support for assistance.

E01

DRAM data line is abnormal.  Contact Buffalo tech support for assistance.

E02

DRAM address line is abnormal.   Contact Buffalo tech support for assistance.

E03

RTC chip is abnormal.   Contact Buffalo tech support for assistance.

E04

Kernel extraction failed. Contact Buffalo tech support for assistance. 

E14

The RAID array cannot be mounted. Turn off power, then turn power on again.  
If the same error is displayed, re-configure RAID.  And if the same error is displayed again, contact 
Buffalo tech support for assistance.

E15

Hard drive I/O error. Contact Buffalo tech support for assistance.

E16

The hard drive is not connected, or data transfer has failed. Check your hard drive status. If the error 
still remains, contact Buffalo tech support for assistance.

E17

Controller error.  Contact Buffalo tech support for assistance.

E21

Controller error.  Contact Buffalo tech support for assistance.

E23

The hard drive has crashed.  Contact Buffalo tech support for assistance.

10s place

The LED illuminates for 1 second every 0.3 seconds.
The number of flashes is the tens place of the error code.

1s place 

The LED illuminates for 0.5 seconds every 0.3 seconds.
The number of flashes is the ones place of the error code.

Solid Blue

The LinkStation is powered on.

Blinking blue

The LinkStation is starting up or shutting down.

Off

The LinkStation is off.