Buffalo 3TB LinkStation 410 LS410D0301 Manuale Utente

LinkStation User Manual

171

Appendix

Cause 9. TCP/IP does not work properly.

 Install the LAN adapter's driver again.

Cause 10. You are running Setup second time or more (it has been already run before).

After initializing the LinkStation, follow steps described in "LinkNavigator Setup" on Page 4  
to run Setup. 

Note:   – When using Power Management with PC feature, you need to install NAS Navigator2 on 

all computers connected within the same network as the LinkStation.

The LinkStation may not be physically connected or may not be recognized properly. Reconnect the 
Ethernet cable and restart your computer and the LinkStation.

If you use a shared folder on the LinkStation as a network drive, you may not be able to access to the 
LinkStation when the IP address or the workgroup has changed.

In such a case, follow the instructions in "Opening the Shared Folder" on Page 17 and open the 
shared folder on the LinkStation by using NAS Navigator2.

Note:  – On Mac OS, LinkStation is mounted as a drive icon on the desktop, or displayed in the 

sidebar on Finder.

 – If the problem still persists after you tried the procedures described above on Mac OS, 

select [System]-[Storage]-[Disks]-[Check Disk]-[Delete any hidden, non-essential MacOS 
dedicated files] on the Web Admin interface, and run Disk Check.

If power outage occurred or the AC adapter is unplugged while the LinkStation is ON, the LinkSta-
tion's firmware may be corrupted and shared folders may not open (You can search for folders on 
NAS Navigator2 but they do not open).

Note:   – In such a case, the LinkStation name displayed on NAS Navigator2 or the Web Admin 

interface on the LinkStation  is displayed as LS-XHL-EM abc(abc stands for last 3 digits 
of the MAC address of the LinkStation) or LS-CHL-EM abc, LS-WXL-EM abc, LS-WSXL-EM 
abc,. In such a case, download the latest firmware from BUFFALO's website (www.buf-
falotech.com) and update it.