Buffalo TeraStation 5200 8TB (2x4TB) TS5200D0802 Scheda Tecnica
Codici prodotto
TS5200D0802
67
• After a drive is replaced, it takes about 30 minutes before normal file reading and writing are restored. Settings
may not be accessible during this period.
• Do not change the order of the hard drives in the TeraStation. For example, pulling out drive 1 and replacing it
with drive 2 may cause data to be corrupted or lost.
• If the LCD display does not change after a new drive is installed, click Rediscover Disk in Settings.
• If the message “HDx Error E22 HDx Can’t Mount” remains on the LCD display after the RAID rebuild is finished,
• If the message “HDx Error E22 HDx Can’t Mount” remains on the LCD display after the RAID rebuild is finished,
reboot your TeraStation.
Hard Drive Replacement Examples
Drive Replacement (using JBOD or a redundant RAID mode such as RAID 1, 5, or 6 with
auto-shutdown disabled)
auto-shutdown disabled)
This section describes replacing a drive with
the TeraStation on
.
1
TS5800D,TS5600D,TS5400D,TS5200D: Open the front cover with the included key.
2
The failed drive’s status LED will be glowing red. Push its unlock button and swing the lock mechanism out.