Buffalo TeraStation 3400r 12TB TS3400R1204-EU Scheda Tecnica
Codici prodotto
TS3400R1204-EU
152
7
Choose an external port, then click OK.
SNMP
If SNMP is enabled, you can browse your TeraStation from SNMP-compatible network management software. The
specific MIB (management information base) file for Buffalo is available from the Buffalo website (buffalotech.com).
specific MIB (management information base) file for Buffalo is available from the Buffalo website (buffalotech.com).
1
In Settings, click Network.
2
Move the SNMP switch to the
position.
3
Click
to the right of “SNMP”.
4
Click Edit.
5
Configure the desired settings, then click OK.
Saving and Applying Settings
The TeraStation’s settings can be saved to a USB memory device and restored to another TeraStation. Use this function to
back up and copy settings to a new TeraStation.
back up and copy settings to a new TeraStation.
Make a note of the hard drive configuration (number of hard drives, RAID, LVM, etc.) of the TeraStation where the
settings were saved. Make sure that any TeraStation that you apply these settings to has exactly the same hard drive
settings were saved. Make sure that any TeraStation that you apply these settings to has exactly the same hard drive