Buffalo TeraStation 5200 TS5200D0602-EU Scheda Tecnica
Codici prodotto
TS5200D0602-EU
40
Using JBOD
With JBOD, each hard drive in the TeraStation is addressed separately. To put drives from an array into JBOD, follow the
steps below.
steps below.
1
Select RAID.
2
Select the array to delete.
3
Click Delete RAID Array.
Once JBOD is configured, create shared folders on each drive to use them.
Changing RAID Mode
To change the RAID mode, first put the drives in JBOD.
1
Select RAID.
2
Click the array to delete.
Note: If the “RAID Mode” field is blank, the array is already in JBOD. Proceed to step 7.
3
Click Delete RAID Array.
4
The “Confirm Operation” screen will open. Enter the displayed number, then click OK.