Buffalo 8TB LinkStation 420 LS420D0802 Scheda Tecnica
Codici prodotto
LS420D0802
LinkStation User Manual
152
Appendix
The following settings are factory defaults for the LinkStation.
Default Settings
Administrator's Name admin
Password
Password
password
Shared folders
By default, the folder “share” may be accessed from both Windows and
Macintosh computers. The recycle bin is [Enabled] on ‘share’ by default.
Macintosh computers. The recycle bin is [Enabled] on ‘share’ by default.
DHCP Client
Normally, the LinkStation will get its IP address automatically from a
DHCP server on the network. If no DHCP server is available, then an IP
address will be assigned as follows:
IP Address: 169.254.xxx.xxx where xxx are random numbers between 1
and 254.
Subnet Mask: 255.255.0.0
DHCP server on the network. If no DHCP server is available, then an IP
address will be assigned as follows:
IP Address: 169.254.xxx.xxx where xxx are random numbers between 1
and 254.
Subnet Mask: 255.255.0.0
Registered Group
The LinkStation has 3 default groups: hdusers, admin and guest. You
cannot edit or delete these groups.
cannot edit or delete these groups.
Microsoft Network
Group Setting
Group Setting
WORKGROUP
Note: If you installed the LinkStation from the LinkNavigator installation
CD, then the LinkStation's workgroup is set to the same workgroup as the
computer you used for setup.
Note: If you installed the LinkStation from the LinkNavigator installation
CD, then the LinkStation's workgroup is set to the same workgroup as the
computer you used for setup.
Ethernet
Frame Size
Frame Size
1518 bytes
AFP
Disabled
FTP
Disabled
NTP
Automatic
PrintServer
Enabled
WebAccess
Disabled
Media Server
(DLNA/iTunes)
(DLNA/iTunes)
Enabled
BitTorrent
Disabled
Note: The installation program on the LinkNavigator CD can only configure a LinkStation once.
To automatically install a LinkStation a second time, use the Init button to initialize the
LinkStation’s configuration first.
LinkStation’s configuration first.