Buffalo TeraStation 3400r 16TB TS3400R1604-EU Scheda Tecnica
Codici prodotto
TS3400R1604-EU
136
Timer 1: Every day 9:00-18:00
Timer 2: Selected day of the week Wednesday 10:00-25:00
Timer 3: Not used
On days other than Wednesday, normal operation begins at 9:00 and the unit goes into sleep mode at 18:00. On
Wednesday, normal operation begins at 9:00 and the unit goes into sleep mode at 1:00 the next day.
Example 4:
When running at a current time of 10:00 Wednesday
Timer 1: Every day 9:00-18:00
Timer 2: Selected day of the week Wednesday 7:30-22:00
Timer 3: Not used
On days other than Wednesday, normal operation begins at 9:00 and the unit goes into sleep mode at 18:00. On
Wednesday, normal operation begins at 7:30 and the unit goes into sleep mode at 22:00.
Timer 2: Selected day of the week Wednesday 10:00-25:00
Timer 3: Not used
On days other than Wednesday, normal operation begins at 9:00 and the unit goes into sleep mode at 18:00. On
Wednesday, normal operation begins at 9:00 and the unit goes into sleep mode at 1:00 the next day.
Example 4:
When running at a current time of 10:00 Wednesday
Timer 1: Every day 9:00-18:00
Timer 2: Selected day of the week Wednesday 7:30-22:00
Timer 3: Not used
On days other than Wednesday, normal operation begins at 9:00 and the unit goes into sleep mode at 18:00. On
Wednesday, normal operation begins at 7:30 and the unit goes into sleep mode at 22:00.
• To turn on the TeraStation before the wake-up time when it is in sleep mode, press the power button.
Wake-on-LAN
The TeraStation supports Wake-on-LAN, which allows it to be turned on remotely.
1
In Settings, click Network.
2
Click the
icon to the right of “IP Address”.
3
Click Change.
4
Enable “Wake-on-LAN”, then click OK.
Wake-on-LAN is now enabled. As long as it is connected to power and the network, you can turn on the
TeraStation remotely.
TeraStation remotely.
Notes:
• After a power outage, wait 5 minutes after power is restored to send the Wake-on LAN packet to the TeraStation.
• After receiving the Wake-on-LAN packet, the TeraStation may take approximately five minutes to be ready to use.
• To use Wake-on-LAN, you’ll need Wake-on-LAN software such as AMD’s Magic Packet utility. The TeraStation does
• After a power outage, wait 5 minutes after power is restored to send the Wake-on LAN packet to the TeraStation.
• After receiving the Wake-on-LAN packet, the TeraStation may take approximately five minutes to be ready to use.
• To use Wake-on-LAN, you’ll need Wake-on-LAN software such as AMD’s Magic Packet utility. The TeraStation does
not include Wake-on-LAN software.
• The TeraStation does not support using Wake-on-LAN and port trunking at the same time. You may use either
feature, but not both at the same time.
• On the local network, Wake-on-LAN packets may be sent to port 2304 on either of the TeraStation’s LAN ports. If
the TeraStation is connected to a Buffalo wireless router configured for remote access, then it may be turned on