Buffalo TeraStation 3400r 16TB TS3400R1604-EU Scheda Tecnica

155

Click the 

 icon to the right of “Restore/Erase”.

Click Initialize TeraStation.

The “Confirm Operation” screen will open. Enter the displayed number, then click OK.

The TeraStation will be restored to its factory default settings.

A system initialization drive will restore the settings on your TeraStation to their factory defaults. You can initialize them 
without logging in to Settings. Follow the steps below to create a system initialization drive.

Notes: 
•  Normally, making and using the system initialization drive will not affect data. However, always back up your data 

regularly!

•  This USB drive can use to recover the system if your TeraStation doesn’t boot at all. In this case, if the data parti-

tion is damaged, then all your data will be deleted by the recovery process.

Insert a 1 GB or larger USB flash drive into a USB port on the TeraStation.

Note: All data on the USB flash drive will be erased!

In Settings, navigate to Management-Restore/Erase-USB Options.

Select Create a USB drive for initializing settings.

Select the USB memory device from “Target USB drive”, then click Execute.

Enter the 4 digit confirmation number and click OK. The TeraStation will create the initialization drive. This will take 
about a minute.

When the “finished” dialog opens, the USB initialization drive is ready to use. Dismount the USB drive before 
unplugging it. See “Dismounting Drives” in Chapter 4 for the instructions on dismounting drives.

To initialize the settings on your TeraStation with the USB drive as created in above, follow the procedure below.

Create a USB “initialization drive” as described above.

Insert the USB drive into a USB 2.0 port (not a USB 3.0 port) on the TeraStation.