Buffalo TeraStation 5200 TS5200D0202-EU Scheda Tecnica

138

Notes: 
•  Up to three timers can be set.
•  The time to enter sleep mode can be set from 0:00 am to 3:45 of the next day.

The time to wake from sleep mode can be set from 0:00 to 23:45.
If the time to enter sleep mode is after 24:00, the wake-up time setting may be from 4:00 to 23:45.

•  The time to enter sleep mode should not be set at the same time as or before the start time.
•  If a backup task is scheduled during a disk check, disk format, backup job or within 5 minutes of the current time, 

the TeraStation will not change to standby mode when the configured time is reached.

•  If scheduled times in the timer overlap, operation is performed using the widest time interval.
•  Examples of multiple timer settings are shown below.

Example 1:
If running at a current time of 10:00 Wednesday
Timer 1: Daily 12:00–24:00
Timer 2: Not used
Timer 3: Not used
No operation is performed at 12:00 and the unit goes into sleep mode at 24:00.
Example 2:
If running at a current time of 10:00 Wednesday
Timer 1: Daily 9:00-18:00
Timer 2: Wednesday 10:00–20:00
Timer 3: Not used
On days other than Wednesday, normal operation begins at 9:00 and the unit goes into sleep mode at 18:00. On 
Wednesday, the unit goes into sleep mode at 20:00.
Example 3:
If running at the current time of 10:00 Wednesday
Timer 1: Daily 9:00-18:00
Timer 2: Wednesday 10:00–1 am of the next day
Timer 3: Not used
On days other than Wednesday, normal operation begins at 9:00 and the unit goes into sleep mode at 18:00. On 
Wednesday, normal operation begins at 10:00 and the unit goes into sleep mode at 1:00 am of the next day.
Example 4:
When running at a current time of 10:00 Wednesday
Timer 1: Daily 9:00-18:00
Timer 2: Wednesday 7:30–22:00