Buffalo TeraStation 5200 TS5200D0202-EU Scheda Tecnica
Codici prodotto
TS5200D0202-EU
171
1
Click the
icon in the Dock. NAS Navigator2 will launch.
2
Double-click the TeraStation icon or click the TeraStation icon while holding down the control key, then select
Open Folder. Enter a username and password with the rights to access the shared folder.
Open Folder. Enter a username and password with the rights to access the shared folder.
3
Select the shared folder that you want to mount, then click OK.
4
The shared folder is now mounted as a network drive.
Changing the IP Address
1
Click the
icon in the Dock. NAS Navigator2 will start.
2
Click the TeraStation icon while holding down the control key, then choose Configure... - IP Address.
3
Uncheck “Use DHCP” and enter the desired settings, then click OK.
Note: The following IP addresses are reserved and should not be used. If you configure one of them by accident,
initialize all settings with the init button on the TeraStation.
initialize all settings with the init button on the TeraStation.
Local loopback address: 127.0.0.1, 255.255.255.0