Buffalo NAS server 8 TB TeraStation 5400 WD Red TS5400DWR0804-EU built-in Western Digital RED TS5400DWR0804-EU Scheda Tecnica
Codici prodotto
TS5400DWR0804-EU
164
Note: Make sure the TeraStation’s Ethernet frame size is smaller than the hub or router’s. Larger frame sizes may not
transfer the data to the TeraStation correctly.
transfer the data to the TeraStation correctly.
Changing the IP Address
Normally, the TeraStation’s IP address is set automatically from a DHCP server on your network. If you prefer, you can set
it manually. An easy way to do this is to change it from NAS Navigator2 running on a computer connected to the same
router (subnet) as the TeraStation. The procedure to change the IP address in Settings is below.
it manually. An easy way to do this is to change it from NAS Navigator2 running on a computer connected to the same
router (subnet) as the TeraStation. The procedure to change the IP address in Settings is below.
Note: If the TeraStation is being used as an iSCSI hard drive, to change the settings, navigate to Drives - iSCSI in
Settings and move the iSCSI switch to the
Settings and move the iSCSI switch to the
temporarily before changing network settings.
1
In Settings, click Network.
2
Click
to the right of “IP Address”.
3
Click the LAN port where the IP address will be changed.
4
Click Edit.
5
Disable “DHCP” and enter the desired network address settings, then click OK.