Buffalo NAS server 8 TB TeraStation 5400 WD Red TS5400DWR0804-EU built-in Western Digital RED TS5400DWR0804-EU Scheda Tecnica

80

Click Yes.

Notes: 
•  A maximum of 64 shared folders can be configured for replication.
•  Shared folders with a backup password set cannot be selected as replication targets.
•  Replication can also be used to copy all data from a share to a share on an attached external drive. Format the 

drive with ext3 or XFS before using for replication. Drives with FAT32 partitions are not supported with replica-
tion.

•  You can select subfolders as the replication source. Folders whose names contain more than 80 alphanumeric 

characters cannot be selected.

•  Don’t use the same TeraStation for both failover and replication, or replication and Time Machine.
•  Don’t configure replication from one source folder to multiple target folders.
•  If replication is configured via LAN port 2 and DHCP is used, the TeraStations may not automatically recover from 

network disconnection. If this happens, restart the TeraStations. For best results, give both replication TeraSta-
tions static IP addresses.

With failover, two TeraStations are connected to the network for redundancy. If a problem occurs in the main TeraStation 
so that it can no longer be accessed, operation is automatically switched to the backup TeraStation.

Notes: 
•  Use identical model and capacity TeraStations for the main TeraStation and backup TeraStation. If the capacity of 

the main TeraStation is larger than that of the backup TeraStation, a “Replication I33 ReplicateFailure” error will 
occur.

•  All drive bays of a TeraStation should be occupied if it will be used for failover. Failover will not work if a drive is 

missing from any bay.

Two different configurations for failover are available.

With the first setup, if the main TeraStation fails, the backup TeraStation will replace it completely, using the same name 
and IP address. The backup TeraStation is updated over normal network traffic.