Buffalo LinkStation 441D + 4x DT01ACA200 LS441DE-EU + 4X DT01ACA200 Manuale Utente
Codici prodotto
LS441DE-EU + 4X DT01ACA200
88
5
Click the Time tab. Enable NTP server and check "Use Local Date/Time" to use your computer's time settings for
the LinkStation.
the LinkStation.
By default, the LinkStation adjusts its clock automatically by using a default NTP server. This NTP server
belongs to Internet Multi Feed Inc. For more information, visit http://www.jst.mfeed.ad.jp.
To use a different NTP server, navigate to Management - Name/Time/Language. Click Time, then Edit. Uncheck
"Use Default NTP Server" and enter a new NTP IP address. Click OK.
If NTP is not used, enter the time and date manually. Click Use Local Date/Time to import the time and date
from your computer.
If an NTP server is specified by name instead of IP address, make sure that a DNS server is configured for the
LinkStation.
belongs to Internet Multi Feed Inc. For more information, visit http://www.jst.mfeed.ad.jp.
To use a different NTP server, navigate to Management - Name/Time/Language. Click Time, then Edit. Uncheck
"Use Default NTP Server" and enter a new NTP IP address. Click OK.
If NTP is not used, enter the time and date manually. Click Use Local Date/Time to import the time and date
from your computer.
If an NTP server is specified by name instead of IP address, make sure that a DNS server is configured for the
LinkStation.
Note: The internal clocks of the LinkStation and other devices on your network may run at slightly different
speeds. Over a long period of time your network devices may show somewhat different times, which can cause
network problems. If clocks on your network vary by more than 5 minutes it may cause unexpected behavior.
For best results, keep all clocks on the network set to the same time by adjusting them regularly, or use an NTP
server to correct them all automatically.
speeds. Over a long period of time your network devices may show somewhat different times, which can cause
network problems. If clocks on your network vary by more than 5 minutes it may cause unexpected behavior.
For best results, keep all clocks on the network set to the same time by adjusting them regularly, or use an NTP
server to correct them all automatically.
6
Click the Language tab. Select the language to be used in the Windows client, then click OK.
Note: This tab changes the language used by the LinkStation for email notification, DLNA, and other functions.
To change the language displayed in Settings, go to Advanced Settings or Easy Admin and click Language in the
menu bar. Choose your desired language from the drop-down menu.
To change the language displayed in Settings, go to Advanced Settings or Easy Admin and click Language in the
menu bar. Choose your desired language from the drop-down menu.