TP-LINK JetStream TL-SG1024DE Scheda Tecnica
Codici prodotto
TL-SG1024DE
Easy Smart Configuration Utility User Guide
Speed and Duplex:
Config: Select the Speed and Duplex mode for the port. The
device connected to the switch should be in the same Speed
and Duplex mode with the switch. When “Auto” is selected, the
Speed and Duplex mode will be determined by
auto-negotiation.
device connected to the switch should be in the same Speed
and Duplex mode with the switch. When “Auto” is selected, the
Speed and Duplex mode will be determined by
auto-negotiation.
Actual: Displays the actual working state of the port.
Flow Control:
Config: Select On/Off to Enable/Disable the Flow Control
feature. When Flow Control is enabled, the switch can
synchronize the speed with its peer to avoid the packet loss
caused by congestion.
feature. When Flow Control is enabled, the switch can
synchronize the speed with its peer to avoid the packet loss
caused by congestion.
Actual: Displays the state of the Flow Control function of the
port. It is off by default.
port. It is off by default.
LAG:
Displays the LAG number which the port belongs to.
Note:
1.
The switch can not be managed through the disabled port. Please enable the port which is
used to manage the switch.
used to manage the switch.
2.
The parameters of the port members in a LAG should be set as the same.
4.2 IGMP Snooping
Internet Group Management Protocol (IGMP) snooping is a multicast control mechanism, which
can be used on the switch for dynamic registration of the multicast group.
can be used on the switch for dynamic registration of the multicast group.
IGMP Snooping allows the switch to recognize the IGMP messages transmitted between network
stations or devices and an IGMP host. When receiving IGMP report message from the IGMP host,
the switch will add the port to the multicast address table; when listening to IGMP leave message
from the IGMP host, the switch will remove the port from the multicast address table. By managing
and controlling the multicast address table, the broadcasting of multicast traffic can be effectively
prevented in the network.
stations or devices and an IGMP host. When receiving IGMP report message from the IGMP host,
the switch will add the port to the multicast address table; when listening to IGMP leave message
from the IGMP host, the switch will remove the port from the multicast address table. By managing
and controlling the multicast address table, the broadcasting of multicast traffic can be effectively
prevented in the network.
On this page you can enable IGMP snooping feature and view the current IGMP Group
information.
information.
Choose the menu Switching→IGMP Snooping to load the following page.
25