HP CB435AB Scheda Tecnica

Pagina di 5
SAFETY DATA SHEET
Ferrite
35 - 45
Trade Secret
space
Wax
5 - 10
Trade Secret
space
Inhalation
Move person to fresh air immediately. If irritation persists, consult a physician.
.
4. FIRST AID MEASURES
space
Skin contact
Wash affected areas thoroughly with mild soap and water. Get medical attention if irritation
develops or persists.
space
Eye contact
Do not rub eyes. Immediately flush with large amounts of clean, warm water (low pressure)
for at least 15 minutes or until particles are removed. If irritation persists, consult a physician.
space
Ingestion
Rinse mouth out with water. Drink one to two glasses of water. If symptoms occur, consult a
physician.
space
Flash point and method
not applicable
.
5. FIRE-FIGHTING MEASURES
space
Fire fighting
equipment/instructions
If fire occurs in the printer, treat as an electrical fire.
space
Suitable extinguishing media
CO2, water, or dry chemical
space
Extinguishing media which
must not be used for safety
reasons
None known.
space
Unusual fire & explosion
hazards
Like most organic material in powder form, toner can form explosive dust-air mixtures when
finely dispersed in air.
space
Hazardous combustion
products
Carbon monoxide and carbon dioxide.
space
Specific methods
None established.
space
Personal precautions
Minimize dust generation and accumulation.
.
6. ACCIDENTAL RELEASE MEASURES
space
Environmental precautions
Do not flush into surface water or sanitary sewer system. See also section 13 Disposal
considerations.
space
Handling
Keep out of the reach of children. Avoid inhalation of dust and contact with skin and eyes. Use
with adequate ventilation. Keep away from excessive heat, sparks, and open flames.
.
7. HANDLING AND STORAGE
space
Storage
Keep out of the reach of children. Keep tightly closed and dry. Store at room temperature.
Store away from strong oxidizers.
space
Occupational exposure standards
Personal exposure limit
15
.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
space
Additional exposure data
USA OSHA (TWA/PEL): 15 mg/m3 (Total Dust), 5 mg/m3 (Respirable Fraction)
ACGIH (TWA/TLV): 10 mg/m3 (Inhalable Particulate), 3 mg/m3 (Respirable Particulate)
UK WEL: 10 mg/m3 (Respirable Dust), 5 mg/m3 (Inhalable Dust)
space
Creation date
31-May-2007
Material name
CB435A
Version number
3
SDS UK
2 /  5