HP 643169-001 C Manuale Utente

Codici prodotto

Send a fax

You can send a fax in a variety of ways. Using the printer control panel, you can send a black and

white fax or a color fax. You can also send a fax manually from an attached phone. This allows you to

speak with the recipient before sending the fax.

This section contains the following topics:

●

●

●

●

●

●

Send a standard fax

You can easily send a single- or multiple-page black-and-white or color fax by using the printer

control panel.

NOTE:

If you need to print confirmation that your faxes were successfully sent, fax confirmation

must be enabled.

TIP:

You can also send a fax manually from a phone or by using monitor dialing. These features

allow you to control the pace of your dialing. They are also useful when you want to use a calling card

to charge the call and you have to respond to tone prompts while dialing.

To send a standard fax from the printer control panel

Load the original print-side up in the ADF or print-side down on the right front corner of the

scanner glass.

For more information about loading the original, see

From the Home screen on the printer display, press the Up and Down buttons to select Fax, and

then press OK.

Select Black Fax or Color Fax.

If an original is loaded in the ADF, the document is sent to the number you entered. If no original

is detected in the ADF, a message appears that promts you to make a selection.

TIP:

If the recipient reports issues with the quality of the fax you sent, you can try changing the

resolution or contrast of your fax.

Enter the fax number by using the keypad, and then press OK.

TIP:

To add a pause in the fax number you are entering, press * repeatedly, until a dash (-)

appears on the display.

34 Chapter 6 Fax

ENWW