Brother HL-L9200CDWT Scheda Tecnica
General Information
98
3
Level 1
Level 2
Level 3
Level 4
Options
Descriptions
Network
Wired LAN
TCP/IP
Boot Method
Auto* / Static / RARP /
BOOTP / DHCP
BOOTP / DHCP
Chooses the IP
method that best
suits your needs.
method that best
suits your needs.
IP Address
###.###.###.###
(000.000.000.000)*
(000.000.000.000)*
Enter the IP
address.
address.
Subnet Mask
###.###.###.###
(000.000.000.000)*
(000.000.000.000)*
Enter the Subnet
mask.
mask.
Gateway
###.###.###.###
(000.000.000.000)*
(000.000.000.000)*
Enter the Gateway
address.
address.
IP Boot
Tries
Tries
0 / 1 / 2 / 3* / ... / 32767 Specifies
the
number of
attempts the
machine will try to
obtain an IP
address when the
Boot Method is
set to any setting
except Static.
attempts the
machine will try to
obtain an IP
address when the
Boot Method is
set to any setting
except Static.
APIPA
On* / Off Automatically
allocates the IP
address from the
link-local address
range.
address from the
link-local address
range.
IPv6
On / Off* Enables
or
disables the IPv6
protocol.
protocol.
Ethernet
-
Auto* / 100B-FD /
100B-HD / 10B-FD /
10B-HD
100B-HD / 10B-FD /
10B-HD
Chooses Ethernet
link mode.
link mode.
Wired Status -
Active 100B-FD /
Active 100B-HD /
Active 10B-FD /
Active 10B-HD /
Inactive / Wired OFF
Active 100B-HD /
Active 10B-FD /
Active 10B-HD /
Inactive / Wired OFF
Displays Ethernet
link status.
link status.
MAC Address
-
-
Displays MAC
address of the
machine.
address of the
machine.
Set to
Default
Default
Restores wired network settings of the internal print server to the
factory settings.
factory settings.
Wired Enable -
On* / Off Chooses
Ethernet
link mode.
The factory settings are shown in Bold with an asterisk.