Samsung BN59-01012A Scheda Tecnica
21
1. Introduction
Installing the driver locally
A locally connected machine is a machine directly attached to your computer
using the cable. If your machine is attached to a network, skip the following
steps below and go on to installing a network connected machine’s driver (see
•
If you are a Mac, Linux, or UNIX operating systems user, refer to the
"Installation for Mac" on page 128
"Installation for Mac" on page 128
.
•
The installation window in this
User’s Guide
may differ depending on the
machine and interface in use.
•
Only use a USB cable no longer than 3 meters (118 inches).
12
Windows
1
Make sure that the machine is connected to your computer and
powered on.
powered on.
If the “Found New Hardware Wizard” appears during the installation
procedure, click Cancel to close the window.
procedure, click Cancel to close the window.
2
Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click Start > All programs >
Accessories > Run.
Accessories > Run.
X:\Setup.exe replacing “X” with the letter, which represents your CD-
ROM drive and click OK.
ROM drive and click OK.
3
Select Install Now.
4
Follow the instructions in the installation window.
You can select the software applications in the Select Software to Install
Window.
Window.