Honeywell MS9540 VoyagerCG MK9540-37A38 Scheda Tecnica
Codici prodotto
MK9540-37A38
F
REE
–
S
TANDING
I
NSTALLATION
For Kit #46-46128:
Step 1
Slide the apron (PN 50-50440) over the stand
(PN 36-00454).
(PN 36-00454).
Figure 1.
Step 2
Position the stand so it sits under the tab on the
apron. Then secure the apron to the stand using
the M3 screws (PN 18-18670) and the #5 washers
(PN 18-18671) provided.
apron. Then secure the apron to the stand using
the M3 screws (PN 18-18670) and the #5 washers
(PN 18-18671) provided.
Figure 2.
H
ARD
M
OUNT
I
NSTALLATION
For Kit #46-46351:
Step 1
Use the template provided to drill four #39 pilot
holes in the counter top.
holes in the counter top.
Step 2
Secure the base (PN 36-36080) to the countertop
with the four #8 wood screws (PN 18-18057).
with the four #8 wood screws (PN 18-18057).
Figure 3.
For Kit #46-46128, #46-46351, and MS951 Stand
Replacements:
Step 3
Screw the stand anchor (PN 50-50449) onto the
base assembly until it sits flush.
base assembly until it sits flush.
Figure 4.
H
ARD
M
OUNT
I
NSTALLATION
Step 4
Remove the logo plate on the stand by gently
using an exacto knife to release the plate hook.
using an exacto knife to release the plate hook.
Figure 5.
Step 5
Position the stand over the anchor/base assembly.
Figure 6.
Step 6
Secure the stand to the base assembly by
installing and tightening the M3 hex head screw
(PN 18-18672) under the logo plate as shown.
installing and tightening the M3 hex head screw
(PN 18-18672) under the logo plate as shown.
Figure 7.
Step 7
Snap the logo plate back into place.
Figure 8.
Page 1
Page 2
Page 3