Philips MP3/WMA Micro Hi-Fi System MCM11 MCM11 Scheda Tecnica
Codici prodotto
MCM11
15
EN
5 Listen to radio
Tune to FM radio stations
Note
•
Make sure that you have connected and fully extended
the supplied FM antenna.
1
Press TUNER.
2
Press / on the remote control or
press and hold / on the front panel
for two seconds to tune to a radio station.
3
When the frequency starts to change,
release the button.
»
The FM tuner tunes to a station with
strong reception automatically.
4
Repeat steps 2-3 to tune to more stations.
To tune to a weak station:
Press / repeatedly until you find optimal
reception.
Program radio stations
automatically
Note
•
You can program a maximum of 20 preset radio
stations.
In FM tuner mode, press PROG for 3 seconds
to activate automatic programming.
»
[AUTO] (auto) is displayed.
»
The unit stores all the FM radio stations
automatically and then broadcasts the first
preset radio station.
Program radio stations
manually
Note
•
You can program a maximum of 20 preset radio
stations.
1
Tune to a radio station.
2
Press PROG to activate programming
mode.
3
Press ALB/PRESET+/- to select a number
from 1 to 20 for this radio station, then
press PROG to confirm.
»
The preset number and the frequency
of the preset station are displayed.
4
Repeat steps 2-3 to program other
stations.
Note
•
To overwrite a programmed station, store another
station in its place.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1
Tune to an RDS station.
2
Press RDS repeatedly to scroll through the
following information (if available):
»
Station name
»
Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
»
Radio text
»
Frequency