Cisco RPS1000 380W Redundant PS RPS1000-EU Scheda Tecnica
Codici prodotto
RPS1000-EU
Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 3
●
Detects when the power of an attached device fails and supplies power to it
●
No loss of data or reboot on the part of the device
●
Backs off from powering the failed device when it regains its internal power supply
Specifications
Table 1 contains the specifications, package contents, and minimum requirements for the Cisco
RPS1000 380W Redundant Power Supply Unit.
Table 1.
Specifications for the Cisco RPS1000 380W Redundant Power Supply Unit
Specifications
LEDs
Stby/Active, DC, Temp, Fan, Ch1, Ch2, Ch3, Ch4, Ch5, Ch6
Maximum output power
380W
AC input voltage
100 to 240V AC; 6 to 10A; 50 to 60 Hz
Environmental
Dimensions
W x H x D
W x H x D
14.88 x 1.75 x 17.50 in.
(378 x 45 x 445 mm)
(378 x 45 x 445 mm)
Unit weight
11.51 lb (5.2 kg)
Certification
FCC, CE, Reduction of Hazardous Substances (RoHS), Waste Electrical and Electronic
Equipment (WEEE), C-Tick
Equipment (WEEE), C-Tick
Operating temperature
32º to 113ºF (0º to 45ºC)
Storage temperature
-20º to 65ºF (-4º to 149ºC)
Operating humidity
10% to 85% noncondensing
Storage humidity
5% to 90% noncondensing
Safety
●
UL 60950-1
●
International Electrotechnical Commission (IEC) 60950-1 CB/PSB
●
Canadian Standards Association (CSA) C22.2 No. 60950
●
European Norm (EN) 60950
Electromagnetic compatibility
(EMC)
(EMC)
●
FCC Part 15 (CFR 47) Class A
●
Interference-Causing Equipment Standard (ICES)-003 Class 3
●
EN 55022 Class A
●
International Special Committee on Radio Interference (CISPR) 22 Class A
●
EN 55024
●
EN 61000-3-2
●
EN 61000-3-3
Package Contents
●
Cisco RPS1000 380W Redundant Power Supply Unit
●
RPS1000 cable (1.2 m, 16-pin to 14-pin connector cable)
●
Documentation CD-ROM
●
AC power cord
●
Quick install guide
●
Mounting kit
Minimum Requirements
●
Power outlet
Product Warranty
90-day limited hardware warranty with return to factory replacement.