C&E LED pendant light 3 W Cold white 33099X Silver-grey 33099X Scheda Tecnica

The home technology brand for the entire house. More information at www.sygonix.com

The pendant lamp is intended for illuminating indoor areas; it may be installed and 
operated in dry, enclosed indoor rooms only. The product is intended for installation 
on a ceiling. 

The safety instructions must be observed at all times!

Any use other than that described above could lead to damage to this product and 
involves the risk of short circuits, fi re, electric shock, etc. No part of the product may 
be modifi ed or converted!

This product complies with the applicable national and European requirements. All 
names of companies and products are the trademarks of the respective owners. All 
rights reserved.

• Pendant light

• 2 attachment screws

• Operating instructions

The lightning symbol indicates a health hazard, e.g. electric shock.

This symbol indicates specifi c risks associated with handling, function and 
use. 

The "arrow" symbol indicates special tips and operating information.

 

 The product is intended to be located and used only in dry indoor spac-
es; it must not get damp or wet.

 

The light cannot be dimmed.

 

Observe the operating instructions!

•  Unauthorised conversion and/or modifi cation of the product is not allowed 

for safety and approval reasons (CE).

•   The product is not a toy and must be kept out of the reach of children! There 

is danger of a life-threatening electric shock!

•  The product may be operated only on the mains voltage (see section "Tech-

nical Data"). Never try to operate the product at another voltage, as this will 
cause its destruction.

   During installation, all poles must be disconnected from the mains voltage 

(e.g. via RCD). 

•   The product is designed according to  protection class I; the protective earth 

conductor must be connected. 

   If there is not a mains supply provided with a protective earth conductor at 

the place of installation, the product must not be connected/used there. In 
this case, install a new voltage supply with a protective earth wire.

• The product must not be operated via a dimmer.

•   The product is to be installed and used only in dry, enclosed indoor rooms.  

The product must not get damp or wet as this may damage it; danger of a 
fatal electric shock!

•  Do not use this light in rooms or under adverse ambient conditions where 

combustible gases, vapours or dust are or may be present! There is a risk of 
explosion!

•  Do not hang or attach objects (e.g. decorative material) to the light, there is 

a risk of fi re!

• Caution, LED light: 

  Do not look directly into the LED light!

  Do not look into the beam directly or with optical instruments! 

•  The product must not be exposed to extreme temperatures, strong vibra-

tions or heavy mechanical stress.

•  If it can be assumed that safe operation is no longer possible, the device 

must be turned off and precautions are to be taken to ensure that it is not 
used unintentionally. After this, arrange for an expert to check the product.

   Safe operation can no longer be assumed if:

  -  the product shows visible signs of damage

  -   the product does not work at all or works poorly (where there is fl icker-

ing light, leaking smoke or a smell of burning, audible crackling noises, or 
discolouration of the product or to adjacent surfaces)

  -  the product was stored under unfavourable conditions

  -  it was exposed to heavy loads during transport

•  Do not leave packaging material carelessly lying around, since it could be-

come a dangerous plaything for children.

•  In commercial institutions, the accident prevention regulations of the Em-

ployer’s Liability Insurance Association for Electrical Systems and Operating 
Facilities are to be observed!

•   If you have any questions that are not answered in this manual, please con-

tact our technical service or another specialist.

•   Install the pendant light only on a stable surface. Use screws and plugs that are suit-

able for the surface. Use the product only when it is fi rmly and steadily mounted.

•  The pendant light must be installed and used out of the reach of children.

•   The pendant lamp must be protected by a 10/16A fuse on the customer's distribution 

board. An earth circuit fault interrupter must be installed before this (FI protective 
switch).

•   Install the pendant lamp only when it is disconnected from the power supply. It is not 

suffi cient to just turn off the light switch!

   First switch off all poles of the mains supply by removing the fuse or switching off 

at the circuit breaker and then also switch off the associated residual current circuit 
breaker. Secure it against unauthorised reconnection, e.g. with a danger sign. 

•  Check that the mains cable is free of current e.g. with an appropriate tester. 

Operating instructions
LED Pendant Light „Magno“, 1 x 3 W