Keba 89.849 Electric Cars KEBA 89.849 Electric Cars N/A Silver, Grey Silver, Grey 89.849 Scheda Tecnica

Using the charging station KeContact 

P20 

12 

User manual, Version: 1.30 / Article no.: 90061 

 

© KEBA 2012-2013 

 

 

Status LED – segments 

Status LED - segments 
The status LED provides information about the 
current operating state of the charging station 
and consists of 4 segments (S1 to S4) which 
can light up together or individually. 

 

All segments can light up or flash in different 
colors. 

 

If not otherwise specified, all 4 segments light 
up together. 
 
 

 
 

green 

 

Ready for operation (charging cable is not yet plugged in on both sides; 

 

optional: The charging station was authorized correctly by key switch or 
RFID card) 

 

Flashes 
slowly every 
3 seconds 

blue 

 

Authorization is required (charging station has not been authorized cor-
rectly yet; authorization with RFID, key switch or external enable required) 

 

green 

 

Ready for charging (charging cable is plugged in on both sides and 
locked) 

 

Lights up 
continuously 

blue 

 

Ready for charging with ISO15118 (charging cable is plugged in on both 
sides and locked) 

 

External enable still required (authorization with RFID or key switch car-
ried out; vehicle connected correctly; external enable on the enable input 
still necessary) 

 

green 

 

Charging procedure is carried out (applies for "EN 61851 Mode 3" charg-
ing procedure) 

 

Flashes 
every sec-
ond 

blue 

 

Charging procedure is carried out (applies for "ISO15118" charging proce-
dure) 

 

 

Lights up orange briefly 

after plugging in 

 

 

Wait for locking (charging cable was plugged in and the system attempts 
to lock the plug) 

 

 

Green LED goes out 

briefly every 3 seconds 

 

 

Wait for unplugging (charging procedure complete, vehicle unplugged)